How To Make A Palm Cross Pdf

This is my preferred pattern. Information technology takes a bit more than do, but looks like the ones I used to get when I was little. A palm frond about 1/4 inch wide and 13 inches long volition make an average size cross.

one. Hold the frond horizontally

2. Bend the right end straight up from the centre to form a right bending.

3. Fold this same top strip, from the eye, back and down, up and over once more, to course a foursquare at the back. Information technology volition withal exist a right angle at this indicate.

iv. a) Bring the left strip forward and fold over the centre towards the right.
�� b) Fold away from you and pull through the foursquare at back, all the way.

five. Curve the top strip forward and put the stop through the centre square to make a shaft of desired length.

vi. Fold left hand strip backwards and put through the back square. This makes the left crossbar and should be in proportion to the shaft.

seven. Fold the correct strip dorsum, put through the back square and fasten.

Design #2:

This one is probably much easier, specially when teaching children

ane. Take a palm frond about 1/2 inch wide and 13 inches and concord upright

2. Fold the top down, away from you, and the bottom upwardly, away from yous, to course the shaft of a cross of desired length

3. Turn the cease down and twist effectually to the right and across the front of the shaft to make a batten in proportion to the length.

4. Fold the end around behind the shaft.

5. Bring the end from backside, under the centre. Fold from the bottom right to the meridian left and under again from the bottom left to the acme right.

Total credit is given to the higher up. This page is copied for the purpose of keeping the folio online during high traffic times such as Palm Sunday.

RETURN TO Palm Sunday Page